优质高温润滑脂的特点：
1）滴点高、热稳定性好
2）高温蒸发量小
3）高温下结焦少。
The characteristics of high-quality high-temperature grease are: 1) high dropping point and good thermal stability; 2) small evaporation at high temperature; and 3) less coking at high temperature.
长期在180℃以上工作，高温脂需要定期更换
Working temperature above 180℃ for a long time, High Temperature Grease needs to be replaced regularly
评判高温脂的寿命，依据它在工作温度的蒸发量数据
The life of high temperature grease is judged according to its evaporation data at working temperature
联博®高温润滑脂精选
Learnber®Selective High Temperature Grease
| 应用场合 Application | 型号 Product of Type | 工作温度 OperationTemperature | 特点 Solution |
| 耐高温氟脂 High temperature resistant fluorine grease | GP8014 | -40℃--280℃（短期320℃） | 顶级耐高温润滑脂，烤漆生产线、高温模具活动部位润滑 Top-grade high-temperature grease, baking varnish production line, high-temperature mold moving parts lubrication |
| 耐高温润滑脂 | GP461F | -25℃--250℃ | 耐高温、润滑性好、寿命长 |
| High temperature and extreme pressure grease | High temperature resistance, good lubricity and long service life | ||
| 高低温轴承润滑脂 High and low temperature resistant bearing grease | PG73-17pro（聚脲） | -40℃--180℃ | 工作温度宽广、润滑寿命长 DN值小于80万 Wide working temperature, long lubrication life, DN value less than 800,000 |
| 耐高温金属齿轮脂 | GP311 | -25℃--180℃ | 高粘度、附着力好，正反转间隔运行减速箱 |
| High temperature resistant metal gear grease | High viscosity, good adhesion, speed reducer running at intervals of forward and reverse rotation | ||
| 二硫化钼膏 Molybdenum disulfide paste | GP300 | -30℃--200℃，短期400℃ | 高温、重载环境下金属润滑 Metal lubrication under high temperature and heavy load environment |
| 注塑模具润滑脂 | GP461F | -25℃--250℃ | 极压润滑、注塑模具顶针润滑、高温轴承润滑 |
| Grease for injection mold | Extreme pressure lubrication, injection mold thimble lubrication, high temperature bearing lubrication | ||
| 氟硅润滑脂 Fluorosilicone grease | GP482F/N | -40℃--220℃ | 低速下耐高温金属润滑PTFE减磨塑胶润滑 High temperature resistant metal lubricated; PTFE antifriction plastic lubrication at low speed. |
以上仅是联博代表型号，更多信息咨询请联系
The above is only the typical model of LianBo, please contact for more information